Interior Bell Pull BP172 Original, quality, late 19th century, interior bell pull, for use with a tight wire, non-electric bell system. Other parts required to operate this system are usually available in stock. This example has black ceramic bosses to the centre and side handle mounted onto a cast brass backplate and arm. Polished and lacquered, although the lacquer may be removed if required at no extra cost. Some minor scratches to the ceramic central boss, otherwise complete and in good and working order. 2.75" diameter x 6" long + 0.75" to be recessed. Click on photo for larger and other view. Price: £115.00
Pair of Interior Bell Pulls BP170 Pair of original, quality, late 19th century, interior bell pulls, for use with a tight wire, non-electrical bell system. The other parts required to operate this system are usually available in stock. These examples have white ceramic bosses to the centre and the side handles, all mounted onto cast brass backplates and arms impressed with Asthetic Movement designs. Both these pulls have the brass linked chain to attach to the wire. Fully overhauled, polished and lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good and working order. Backplate 3.5" diameter, total 5.5" tall + 1.5" front to back + 0.5" to be recessed. Price is for the pair. Click on photo for larger and other view. Price: £250.00
Exterior Brass Bell Pull BP169 Original, quality, late 19th century, cast brass bell pull, with a scooped and square surround. For use with a tight wire, non-electrical bell system, other parts required to operate this system are usually available in stock. Replacement rear spring and washers have been fitted and all is now complete and in good and working order. Backplate 4.25" square knob x 1.75" all, 1.25" front to back + 0.75" to be recessed. Click on photo for larger and other views. Price: £245.00
Exterior Brass Bell Pull BP168 Original, quality, late 19th century, cast brass exterior bell pull, with a circular dished backplate with a shaped outer decoration and a central pull knob, with a gothic design in raised detail. For use with a tight wire, non-electrical bell system, other parts required to operate this system are usually available in stock. A replacement rear spring and washer has been fitted and all has been fully overhauled. Complete and in good and working order. Backplate 4.75" + 1" front to back + 0.75" to be recessed. Click on photo for larger and other views. Price: £200.00
W T & S Brass Exterior Bell Pull BP167 Original, quality, late 19th century, brass exterior 'down' bell pull, with a superb open basketweave brass pull handle mounted on a square brass rod, with two mounting brackets in the gothic form and an original spring fitting for the wire entry. For use with a tight wire, non electrical bell system and the other parts required to operate this system are usually available in stock. The reverse of the wall mounts are impressed with "WT&S" and the sun logo for the makers 'William Tonks and Sons of Birmingham". It has been fully overhauled, polished and lacquered, although the lacquer may be removed if required at no extra cost. A super exterior bell pull, one of the best we have had. 22.5" long, handle 1.5"wide, wall mount 2.75" wide and spring unit 7.5" x 1.5". Click on photo for larger and other views. Price: £450.00
Wrought Iron Exterior Bell Pull BP166 Original, quality, mid to late 19th century, wrought iron and cast iron exterior 'down' bell pull, with a large pull handle and rod fittings with a decorative backplate and the original sprung fitting for the wire entry. For use with a tight wire, non electrical bell system and the other parts required to operate this system are usually available in stock. Replacement sprungs have been fitted and all has been cleaned, lacquered and is complete and in good working order. Full length of rod and pull grip 27", backplate 6.25" x 3.25" and spring backplate 5.75" x 3". Click on photo for larger and other views. Price: £350.00
Brass Interior Bell Pull BP165 Original, quality, late 19th century, brass interior bell pull, for use with a tight wire, non-electrical bell system, other parts to operate this system are usually available in stock. This example has a swirling brass central boss and a matching handgrip to the side handle. Polished and lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good and working order. Backplate 3.5" diameter, 6" long including handle + 0.75" to be recessed. Click on photo for larger and other view. Price: £125.00
Brass Exterior Bell Pull BP163 Original, quality 1920's, brass bell pull knob fitted with a replacement bar spring and oval brass backplate made to suit. For use with a tight wire, non- electrical bell system. The other parts required to operate this system are usually available in stock. Complete and in good and working order. Backplate 2.75" x 1.75", knob 1.5" + 1.25" front to back. Click on photo for larger and other view. Price: £125.00
Brass Interior Bell Pull BP162 Original, quality, circa 1900, cast brass, interior bell pull for use with a tight wire, non-electrical bell system. Other parts required to operate this system are usually available in stock. This example has a square backplate engraved with a decorative border and an oval shaped central boss with matching knob to the handle. Polished, lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good and working order. An unusual example. Backplate 3" square, longest 5", 2" front to back and 1" to be recessed. Click on photo for larger and other views. Price: £115.00
Brass Exterior Bell Pull BP159 Original, quality, late 19th Century, cast brass exterior bell pull with a pull down hand grip mounted on a vertical rectangular backplate. The backplate has four countersunk screw holes for mounting and has a replacement spring fitted to the reverse. For use with a tight wire, non-electrical bell system. Many other bell fittings of differing types and the other parts required to operate this system are usually available in stock. This style of exterior bell pull is most unusual and difficult to find today. All has been fully overhauled and lacquered, although the lacquer may be removed if required at no extra cost and is complete and in good and working order. Backplate 5.75" x 2" +2.25" front to back visable, 2" to be recessed + 6.5" total drop including the handle. Click on photo for larger and other views. Price: £245.00
Brass and Ceramic Exterior Bell Pull BP154 Original, quality, late 19th Century, brass, exterior bell pull with a decorative cast brass backplate and a black ceramic pull knob. For use with a tight wire, non-electrical bell system. Many other bell fittings of differing types and the other parts required to operate this system are usually available in stock. All has been fully overhauled and is complete and in good and working order. Backplate 3.25" diameter and 1.25" front to back. Click on photo for larger and other views. Price: £135.00
Brass Exterior Bell Pull BP153 Original, quality, late 19th Century, brass, exterior bell pull with a recessed dish with a square frame and a spherical shaped central pull knob. The face of the frame has four countersunk screw holes for mounting and the rear spring and square bar are replacements made to suit. For use with a tight wire, non-electrical bell system. Many other bell fittings of differing types and the other parts required to operate this system are usually available in stock. All has been fully overhauled and is complete and in good and working order. Faceplate 2.5" square and 1.5" to be recessed. Click on photo for larger and other views. Price: £115.00
Brass External Bell Pull BP152 Original, quality, mid to late 19th Century, cast brass bell pull with a replacement backplate made to suit and for use with a tight wire, non-electrical bell system. Replacement rear springs and washers have been fitted and the other parts required to operate this system are usually available in stock. An unusual example with the enclosed 'T' bar pull handle with finger grips. The circular brass backplate has two countersunk screw holes for mounting and all is complete and in good and working order. Backplate 3" diameter, handle 4.5" wide and 2.75" front to back. Click on photo for larger and other views. Price: £230.00
W T & S Brass Exterior Bell Pull BP145 Original, quality, late 19th Century, cast brass, external bell pull, stamped 'WT & S' to the reverse of the backplate for the manufacturer - William Tonks and Sons of Birmingham. The oval shaped backplate, with two countersunk screw holes for mounting, and 'T' brass pull handle, are both similarly decorated in relief with a 'Gothic' pattern. This bell pull is for use with a tight wire, non-electrical bell system. The other parts required to operate this system are usually available in stock and many other bell fittings of differing types may well be available. All has been fully overhauled and is complete and in good and working order. Backplate 4" x 1.75" and total 1.75" front to back. Click on photo for larger and other views. Price: £135.00
Brass Exterior Bell Pull BP144 Original, quality, late 19th Century, cast brass, exterior bell pull with a drop ring pull handle, on a shaped rectangular backplate with two countersunk screw holes for mounting. The pull handle has a sprung return and this bell pull is for use with a tight wire, non-electrical bell system. Other parts required to operate this system are usually available in stock. All has been fully overhauled and is complete and in good and working order. A good example. Backplate 4.75" x 2.25" and 1" front to back. Click on photo for larger and other views. Price: £156.00
Exterior Brass Bell Pull BP142 Original, quality, late 19th Century, brass exterior bell pull with a decorative shaped cast brass backplate, with four countersunk screw holes for mounting and with an old, replacement pull knob fitted. For use with a tight wire, non electrical bell system and the other parts required to operate this system are usually available in stock. The rear bar and spring are replacements made to suit and all has been polished and fully overhauled. Complete and in good and working order. Backplate 3.25" square, and all 1.5" front to back. Click on photo for larger and other views. Price: £185.00
Huge Brass Bell Pull BP126 Original, quality, late 19th century, very large cast brass continental exterior bell pull. For use with a tight wire non-electrical bell system. The other parts required to operate this system are usually available in stock. The heavy, squared drop ring, pull handle is mounted with a ball backplate onto a shaped flat backplate. Has been fully overhauled and is complete and in good and working order. The main backplate has four countersunk screw holes for mounting. A superb very unusual bellpull. Backplate 10" x 7" + 1.5" front to back. To be recessed 3" x 1" x 1". Click on photo for larger and other views. Price: £600.00
Brass Exterior Bell Pull BP124 Original, quality, late 19th century, cast brass exterior bell pull with a 'T' grip pull, mounted on a shaped backplate with an unusual Aesthetic Movement design. A replacement spring has been fitted and the backplate has four countersunk screw holes for mounting. For use with a tight wire, non electrical, bell system. The other parts required to operate this system are usually available in stock. All has been fully overhauled and is complete and in good and working order. Backplate 6" x 3", and total 1.75" front to back when mounted. Click on photo for larger and other views. Price: £230.00
W T & S Exterior Night Bell Pull BP123 Original quality, late 19th century, cast brass exterior bell pull with a circular dished backplate with 'Night' to the border and a segmented circular and flattened central pull knob. For use with a tight wire non-electrical bell system. The other parts required to operate this system are usually available in stock. A replacement mounting plate, square bar and spring have been made to suit and fitted. The reverse of the backplate is stamped "W T & S" for the manufacturer 'William Tonks & Son of Birmingham' An unusual example. Complete superb and in good and working order. Backplate 5" diameter, 1.5" front to back + 1" to be recessed. Click on photo for larger and other views. Price: £285.00
Ribbed Brass Exterior Bell Pull BP114 Original quality, late 19th century, cast brass ribbed exterior bell pull. For use with a tight wire non-electrical bell system. The other parts required to operate this system are usually available in stock. A replacement square bar and spring has been fitted, all has been fully overhauled and now is complete and in good and working order. Backplate 3", knob 1.5" and 1.75" front to back. Click on photo for larger and other views. Price: £145.00
Pair of Ceramic Bell Pulls BP113 Pair of original quality, late 19th century, bell pulls with white ceramic backplates and pull knobs all decorated with handpainted pink roses, other flowers and leaves. For use with a tight wire non-electrical bell system. The other parts required to operate this system are usually available in stock. All has been fully overhauled. The concealed brass backplates, bars and springs are all replacements made to suit and copied from the original and apart from a large chip to the reverse of one backplate all is complete and in good and working order. A very unusual pair of bell pulls; although originally internal these could be used as external if required. Backplate 4.25", knobs 1.75", front to back 2". Price is per pair. Click on photo for larger and other views. Price: £300.00
Brass Exterior Bell Pull BP112 Original quality, late 19th century, cast brass exterior bell pull with a very detailed design of acanthus leaves to the circular backplate and to the copper front of the pull knob. For use with a tight wire non-electrical bell system. The other parts required to operate this system are usually available in stock. Replacement rear spring bar and screws have been fitted and now all is complete and in good and working order. A highly decorative very unusual bell pull. Backplate 3.25", knob 1.25", front to back 1.5". Click on photo for larger and other views. Price: £285.00
Ceramic Interior Bell Pull BP110 Original quality, late 19th century, interior bell pull in white ceramic with gilt decoration and brass fittings. For use with a tight wire non electrical bell system. The other parts required to operate this system are usually available in stock. All has been fully overhauled. There is a small under glaze chip to the reverse outer edge otherwise all is complete and in good and working order. Backplates 4" diameter, knob 1.75" diameter, 2" to be recessed and 2" front to back. Click on photo for larger and other views. Price: £125.00
Brass Exterior Bell Pull BP109 Original quality, 19th century, very decorative cast brass exterior bell pull with a T bar pull knob with ancathus leaf decoration and a matching backplate, all in deep relief. For use with a tight wire, non electric, bell system. The other parts required to operate this system are usually available in stock. Replacement rear spring, concealed mounting plate and screws have been fitted and, believe it or not, the pull bar has been converted from a door handle of similar age and probably manufactured by the same firm. An unbelievable marriage. All has been fully overhauled and is complete and in good and working order. Backplate 4", knob 2.75" x 1.25" and 2" front to back. Click on photo for larger and other views. Price: £300.00
Exterior Brass Bell Pull BP105 Original quality, early 19th century, brass door knob with a slender neck, fitted with a replacement bar, spring and backplate and now an exterior bell pull for use with a tight wire, non electrical, bell system. The other parts required to operate this bell system are usually available in stock. Complete and in good and working order. Backplate 2.75" x 1.5", knob 1.75" and 2" front to back. Click on photo for lager and other views. Price: £95.00
Interior Brass Bell Pull BP95 Original quality, late 19th century, cast brass recessed interior bell pull of an unusual form, it appears to be a recessed door bolt, but it is for an interior indicator bell. For use with a tight wire, non electrical, bell system. The other parts required to operate this bell system are usually available in stock. The faceplate has four countersunk screw holes for mounting. All is complete and in good and working order. Backplate 7" x 1.25" and 1" to be recessed. Click on photo for larger and reverse views. Price: £75.00
Brass External Bell Pull BP91 Original quality, 19th century, exterior bell pull of an unusual form. The central lever is recessed within a rectangular plate with four countersunk screw holes for mounting. For use with a tight wire non-electrical bell system. The other parts required to operate this system are usually available in stock. All has been fully overhauled and is complete and in good and working order. A very smart bell pull. Backplate 7.75" x 2.5" and to be recessed 2" x 4.5" x 1.75". Click on photo for larger and other views. Price: £230.00
Wrought Iron Exterior Bell Pull BP88 Original, quality, 1920's, wrought iron, exterior, 'down' bell pull with a replacement top sprung fitting, made to suit copied from an original. For use with a tight wire, non electrical bell system and other parts required to operate this system are usually available in stock. The Gothic style drop ring handle is mounted to the square rod with a candy twist between the two wall brackets, each with four countersunk screw holes. Not an easy item to find today. All has been repainted and is complete and in good and working order. Pull 19.5" x 2.75", sprung mount 6" x 3", backplate 3" wide and 2" front to back. Click on photo for larger and other views. Price: £245.00
Brass Bell Pull Grip BP33 Original quality brass, 19th century, handgrip for interior non-electric bell pull systems. This would have been fitted up with a length of tapestry or embroidered cloth and used with a tight wire interior bell system. The other parts required to operate the bell system are usually available in stock. The two screw-on end caps will remove to permit material to be fitted. All has been lacquered, although the lacquer may be removed if required at no extra cost and is complete and in good and working order. 6" long x 4.25" wide x 0.75" front to back. Click on photo for a larger view. Price: £120.00
Brass Bell Pull Fitting, Several Similar Available BPF13 Original, quality, late 19th century, cast brass, surface wall mounted, crank fitting for use with a tight wire, non-electrical bell system. This fitting is used to turn the wire around a corner. The backplate has three countersunk screw holes for mounting and the fitting has two eyes to connect the wire to. Polished and lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good order. Backplate 2.75" x 1.5", total 2.5" x 2.5". Price is for each. Click on photo for larger and other view. Price: £38.00
Brass Bell Pull Fitting, Several Similar Available BPF12 Original, quality, pre-war, surface wall mounted pulley wheel, for use with a tight wire, non-electrical bell system. This fitting is used to change direction on a flat wall. The backplate has two countersunk screw holes for mounting. Polished and lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good order. Backplate 2.5" x 1" + 0.5" front to back. Price is for each. Click on photo for larger view. Price: £38.00
Brass Bell Pull Fitting, Several Similar Available BPF11 Original, quality, pre-war, surface wall mounted pulley wheel, for use with a tight wire, non-electrical bell system. This fitting is used to change direction on a flat wall. The backplate has two countersunk screw holes for mounting. Polished and lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good order. Backplate 2.5" x 1" + 0.5" front to back. Price is for each. Click on photo for larger view. Price: £38.00
Brass Bell Pull Fitting, Many Similar Available BPF10 Quality, brass surface wall mounted pulley wheel, for use with a tight wire, non-electrical bell system. This is a replacement made to suit and sometimes will have used an original wheel. This fitting is used to change direction to up or down, having passed through a wall from say an exterior bell pull, to change direction under a ceiling, beam or inside a corner. The backplate has two countersunk screw holes for mounting and one for the wire, if required. Polished and lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good order. Backplate 1.5" x 0.25" x 1.25". Price is for each. Click on photo for larger and other view. Price: £38.00
Brass Bell Pull Fitting, Many Similar Available BPF9 Original, quality, late 19th century, cast brass, surface wall mounted, crank fitting for use with a tight wire, non-electrical bell system. This fitting is used to change direction on a flat wall and would normally be mounted as the picture. The backplate has three countersunk screw holes for mounting and two eyes to connect the wire to. Polished and lacquered, although the lacquer may be removed if required at no extra cost. The backplate is a replacement made to suit and copied from an original. Complete and in good order. Backplate 2.25", total 3" x 2.5". Price is for each. Click on photo for larger view. Price: £38.00
Brass Bell Pull Fitting, 2 Available BPF5 Original, quality, 19th Century, cast brass fitting for use with a tight wire, non-electrical bell system.This example will make a 45 degree turn after passing through a wall for two separate bells. Has been polished and lacquered and is complete and in good and working order. Backplate 4.75" x 1.5" and 1.5" to be recessed. Price is for each. Click on photo for larger and other views. Price: £45.00
Brass Pull Plaque, Several Similar Available NP133 Original, quality 1920's, small pink brass rectangular shaped plaque, with upper case "Pull" inlaid in white enamel and four screw holes for mounting. Ideal for bell pulls. Has been polished and lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good order. 1" x 1.75". Price is for each. Click on photo for larger and other views. Price: £45.00
Servants Intercom Bell IB170 Original, quality, late 19th Century, brass intercom bell, with brass mounts, steel springs and a decorative brass central boss. This bell can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. The central boss is a replacement made to suit, copied from an original. All has been fully overhauled, the ironwork repainted end, the brass polished and lacquered, although the lacquer may be removed if required at no extra cost. Complete and in good and working order. 10.5" tall x 5.5" wide, 4" front to back, 3.75" mouth of bell diameter. Click on photo for larger and other view. Price: £165.00
Servants Intercom Bell IB169 Original, quality, late 19th Century, brass intercom bell, with brass mounts, steel springs and a decorative brass central boss. This bell can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. The central boss is a replacement made to suit, copied from an original. The brass cranked fitting and the brass clapper are most unusual and much more decorative than on average. All has been fully overhauled, the ironwork repainted and the brass polished and lacquered, although the lacquer may be removed if required at no extra cost. All is complete and in good and working order. 11.5" tall x 5.5" wide, 4.5" front to back, 4" mouth of bell diameter. Click on photo for larger and other views. Price: £185.00
Huge Servants Intercom Bell IB168 Original, quality, mid 19th century, large cast brass intercom bell, with wrought iron springs, steel back mount, brass fittings and a blacksmith made wrought iron clapper. This larger than average bell would be ideal for outside the house, as well as in, and can be pulled from above or below. For use with a tight wire, non-electrical bell system, other parts required to operate this system are usually available in stock. The ironwork has been repainted and the brass polished and lacquered, although the lacquer may be removed if required at no extra cost. All is fully overhauled and complete and in good and working order. Bell mouth 6" diameter, total height 13.75", width 7.5", 8" front to back. Click on photo for larger and other views. Price: £450.00
Servants Intercom Bell IB166 Original, quality, late 19th Century, brass intercom bell, with brass mounts, steel springs and a decorative brass central boss. This bell can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. The mounting plate is a replacement made to suit and the bell is impressed "6". Has been fully overhauled, the ironwork repainted, brass polished and lacquered, although the lacquer may be removed if required at no extra cost. All is complete and in good and working order. 12" tall x 6" wide, 4.5" front to back. Click on photo for larger and other view. Price: £165.00
Servants Intercom Bell IB165 Original, quality, late 19th Century, brass intercom bell, with brass mounts, steel springs and a decorative brass central boss. This bell can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. The mounting plate is a replacement made to suit and the bell is impressed "10". All has been fully overhauled, the ironwork repainted, brass polished and lacquered, although the lacquer may be removed if required at no extra cost. All is complete and in good and working order. 10" tall x 4.5" wide, 4" front to back and 3.5" diameter of bell. Click on photo for larger and other view. Price: £165.00
Servants Intercom Bell IB164 Original, quality, late 19th Century, brass intercom bell, with brass mounts, steel springs and a decorative brass central boss. This bell can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. The mounting plate is a replacement made to suit. This bell is impressed "J.T + Co" for the bell foundry 'John Taylor and Co' and "1403". Has been fully overhauled, the ironwork repainted, the brass polished and lacquered, although the lacquer may be removed if required at no extra cost. All is complete and in good and working order. 12" tall x 5.5" wide, 5" front to back and 3.75" diameter of bell. Click on photo for larger and other view. Price: £165.00
Servants Intercom Bell IB163 Original, quality, late 19th Century, brass intercom bell, with brass mounts, steel springs and a decorative brass central boss. This bell can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. The mounting plate, rear spring and central boss are replacements made to suit, copied from an original. The top of the bell is marked "10" and is fully overhauled. The ironwork has been repainted, the brass polished and lacquered, although the lacquer may be removed if required at no extra cost. All is complete and in good and working order. 9" tall x 5" wide, 4" front to back and 3.25" diameter of bell. Click on photo for larger and other view. Price: £165.00
Servants Intercom Bell IB162 Original, quality, late 19th Century, brass intercom bell, with brass mounts, steel springs and a decorative brass central boss. This bell can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. The mounting plate, rear spring and central boss are replacements made to suit, copied from an original. All has been fully overhauled, the ironwork repainted, the brass polished and lacquered, although the lacquer may be removed if required at no extra cost. All is complete and in good and working order. 10" tall x 5.5" wide, 4.5" front to back and 3.5" diameter of bell. Click on photo for larger and other view. Price: £165.00
Servants Intercom Bell IB161 Original, quality, late 19th Century, brass intercom bell with brass mounts, steel springs and a white ceramic central boss decorated with blue and gold flowers and leaves. This bell can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. All has been fully overhauled, the ironwork repainted, the brass polished and lacquered, although the lacquer may be removed if required at no extra cost and is complete and in good and working order. 10.5" tall x 4.75" wide, 3.5" front to back and 3" mouth of bell. Another bell with a matching boss may well be available ref IB160. Click on photo for larger and other views. Price: £185.00
Servants Intercom Bell IB160 Original, quality, late 19th Century, brass intercom bell with brass mounts, steel springs and a white ceramic central boss decorated with blue and gold flowers and leaves. This bell can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. The top of the bell is impressed "M and S" and "10". All has been fully overhauled, the ironwork repainted, the brass polished and lacquered, although the lacquer may be removed if required at no extra cost and is complete and in good and working order. 11" tall x 5.5" wide, 4" front to back and 3" mouth of bell. Another bell with a matching boss may well be available ref IB161. Click on photo for larger and other views. Price: £185.00
Servants Intercom Bell IB155 Original, quality, late 19th Century, brass intercom bell with brass mounts, steel springs and a decorative brass central boss. The bell is embossed 'B' and '9' to the top, can be pulled from either left or right and is for use with a tight wire, non-electrical bell system. The other parts required to operate this system and other similar bells are usually available in stock. All has been fully overhauled, the ironwork repainted, the brass polished and lacquered and all is complete and in good and working order. The lacquer can be removed upon request, at no extra cost. Total drop 13.5" x 4.5" wide, 4" front to back and 3" diameter of bell. Click on photo for larger and other views. Price: £145.00
Servants Intercom Bell IB139 Original, quality, late 19th Century, small, brass intercom bell with brass mounts, steel springs and a central boss. This bell can be pulled from either left or right, is for use with a tight wire, non electrical bell system and the other parts required to operate this system are usually available in stock. Many other bell fittings of differing types may well be available. All has been fully overhauled, the steel repainted and the brass polished and lacquered, although the lacquer may be removed if required at no extra cost. Some minor dents to the central boss but otherwise all is complete and in good and working order. Total drop 13.5" x 4.5" wide and 3.5" front to back. Click on photo for larger and other views. Price: £145.00